Skip to main content
Nunnallee Inspections

Add-On Services

Run Every Sprinkler Zone Before You Buy

A sprinkler system can look fine while it’s off. Running it shows how the controller, zones and heads actually work.

A gloved hand places an orange flag beside a pop-up sprinkler spraying a lawn next to a limestone flower-bed border

What It Is

An irrigation inspection is an operational check of a property’s sprinkler system. The inspector runs the system and looks for leaks, coverage problems and parts that don’t work as they should.

What Gets Inspected

  • Controller operation and zone programming
  • Each zone, run in turn
  • Sprinkler head condition, alignment and obvious coverage problems
  • Visible leaks, breaks and pooling
  • Visible backflow prevention device

I = Inspected · NI = Not Inspected · NP = Not Present · D = Deficient: the columns on TREC’s inspection report form.

Checked = Inspected (I), the first column on TREC’s report form.

What’s Outside the Scope

  • Buried piping, which can’t be seen
  • Design analysis of coverage or watering rates
  • Backflow certification testing, which is separately licensed work
  • Repairs or repair referrals

Booking Details

Who It’s For
  • Buyers of a home with an installed sprinkler system
  • Buyers of larger lots with established landscaping
  • Buyers who notice high water bills or soggy patches in the yard
When to Order It
As soon as you’re under contract, so there’s time to act on what the report shows.
How to Book
Add it when you schedule, alongside your home inspection.
Who Performs It
A Nunnallee inspector. Inspections are performed under Kyle Nunnallee’s TREC Professional Inspector license #6371. Verify with TREC

In the Austin Market

  • An irrigation leak adds to the water bill every time the system runs.
  • On expansive clay, sprinklers that wet the foundation can add to soil movement. Where heads spray the slab, it’s a foundation finding too.

Common Questions

Does the system need to be on for the inspection?

Yes. The water and power need to be on for the system to run. Tell us if it has been shut off.

What if a zone doesn’t come on?

The report notes it. Finding the cause, such as a faulty valve, wiring or controller, is work for an irrigation contractor.

Read the FAQ

Call Schedule