Skip to main content
Nunnallee Inspections
Blog

Add-On Service Resources · 4 min read

What Do Zip Level Foundation Readings Tell You?

By Nunnallee Inspections ·

A gloved hand steadies a digital floor-level sensor on a wood floor in an empty room, its tube running back to a base unit

The Short Answer

Zip Level readings are an add-on service to a home inspection. The inspector measures the floor’s height at points across the house against one reference point, using a precision altimeter called a ZipLevel. The numbers show where the floor sits high or low. They don’t say why a foundation moved or whether it needs repair.

What the Home Inspection Already Covers

Every Texas home inspection includes a written opinion on how the foundation is performing.

The TREC Standards of Practice require that opinion. It rests on visible signs, such as cracks and sloping floors, and Zip Level readings add measurements to it.

How the Readings Are Taken

A ZipLevel is a precision altimeter, and the inspector works from a single reference point.

The inspector measures the floor at points across the house against that one point. The readings give you:

  • Floor elevations at points across the house
  • The high and low points, measured against the same reference
  • How much the height changes from one area of the floor to another

What the Readings Can’t Tell You

The numbers describe the floor, not the cause.

  • Why a foundation moved, or whether it needs repair
  • Repair recommendations or cost estimates
  • Elevations in areas that can’t be reached for a reading

Clay Soil and Austin Foundations

Much of the Austin area sits on clay soil that swells when wet and shrinks when dry.

A slab on that ground can move with the seasons. One set of readings shows the floor on the day. Measuring the same points again later shows whether it has moved.

When to Add Them

Add Zip Level readings to your home inspection when the house gives you a reason.

  • The house shows cracks, sloping floors or doors that stick
  • You want a record of the foundation’s elevations to compare with later

Frequently Asked Questions

Doesn’t the home inspection already check the foundation?

Yes. A Texas home inspection includes a written opinion on how the foundation is performing. Zip Level readings add measured floor elevations to that opinion.

Do Zip Level readings replace a structural engineer?

No. If the report recommends a structural evaluation, the readings give the engineer measurements to start from.

Can I order Zip Level readings on their own?

Call us to ask. They’re offered as an add-on to a home inspection.

Call Schedule